China ultrafiltration membrane Manufacturers Factory Suppliers
-
Hollow Fiber UltrafiltrationImagine a big bundle of drinking straws. Each strand is hollow in the middle. That is what this hollow fiber ultrafiltration looks like. Water flows on the outside of the strands. Clean water...read more
-
Submerged Uf MembraneMost membranes need water pushed through them under pressure. This product works differently. You put it directly into a tank of water. Then you use a pump to pull clean water from the inside of...read more
-
PVDF Uf MembranePVDF stands for polyvinylidene fluoride. That is a long name for a simple thing. It is a very strong plastic that does not break down. It is not afraid of acid. It is not afraid of alkali. It is...read more
-
PES Ultrafiltration MembranePES stands for polyethersulfone. This material loves water. Water goes through it very fast. So a PES ultrafiltration membrane has a high flow rate. It also handles heat well. It can take...read more
-
Ultrafiltration Membranes for Water TreatmentEvery water treatment plant needs a good filter. That filter takes out dirt, germs, and cloudiness. Ultrafiltration membranes for water treatment do this job better than sand or cloth filters. Our...read more
-
Ultrafiltration Membrane for Wastewater TreatmentTap water is fairly clean to start. Wastewater is the opposite. It can have oil, chemicals, heavy metals, and germs. So a regular membrane will fail quickly. This ultrafiltration membrane for...read more
-
TIPS Ultrafiltration MembraneMost membranes use a process called NIPS. NIPS uses chemicals to create holes in the membrane. TIPS stands for thermally induced phase separation. It uses temperature changes to create holes. This...read more
Description: Ultrafiltration (UF) utilizes a semi-permeable membrane to physically remove suspended particles from water based on particle size and the pore size rating of the UF...
Ultrafiltration (UF) is a membrane separation technique used to separate extremely small particles and dissolved molecules in fluids. The primary basis for separation is molecular size,...
Ultrafiltration (UF) is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. Typically, UF membranes will remove high molecular-weight substances,...
Membrane technologies can be used in combination, such as ultrafiltration followed by reverse osmosis for seawater desalination processes, and microfiltration followed by nanofiltration for...
Ultrafiltration membranes are defined by the molecular weight cut-off (MWCO) of the membrane used, and cross-flow or dead-end mode is applied in different areas. The ultrafiltration...
Ultrafiltration membranes are typically rated by the molecular weight of the solids they remove and are typically rated from 5000 to 300,000 molecular weight cut-off. The membrane selected for a...
Send Inquiry
